Product ID:EA 9394 PART B CATALYST
MSDS Date:09/29/1989
FSC:8040
NIIN:01-297-2378
Kit Part:Y
MSDS Number: BJZZN

DEXTER ADHESIVES AND STRUCTURAL MATERIALS

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 415-687-4201

Preparer: SUZANNE FRANZ

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <10%

OSHA PEL 20 MPPCF

ACGIH TLV: 0.1 MG/M3

ALKYLAMINES

Fraction By Weight: <85%

VOC <10 G/L ESTIMATE

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MATERIAL MAY BE CORROSIVE TO SKIN AND
EYES. MAY CAUSE SEVERE BURNS TO SKIN AND EYES. IRRITATING VAPORS
MAY CAUSE CHEST DISCOMFORT. MODERATELY TOXIC BY INGESTION.
Explanation of Carcinogenicity:N/K *BE BONDED. FAILURE TO OBSERVE
CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF
TOXIC GASES.
Effects of Overexposure:POSSIBLE BURNS TO EYES AND SKIN; IRRITATION AND
POSSIBLE SENSITIZATION TO SKIN. VAPORS IRRITATING TO UPPER
RESPIRATORY TRACT.

First Aid:THOROUGHLY WASH AFFECTED AREA WITH SOAP AND WATER. IF EYES
ARE AFFECTED, FLUSH WITH WATER FOR 15 MINUTES. GIVE WATER OR MILK
IF SWALLOWED, DO NOT INDUCE VOMITING. SEEK MEDICAL AID. REMOVE
CONTAMINATED CLOTHING AND THOROUGHLY CLEAN BEFORE REUSE.

Flash Point:>300
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77 DEG F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE. DO NOT HEAT MIXED
ADHESIVE UNLESS CURING SURFACES TO BE BONDED. FAILURE TO OBSERVE
CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF
TOXIC GASES.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health
CONTAINS TETRAETHYLENEPENTAMINE AND A PIPERAZINE. AVOID CONTACT. VAPORS
MAY BE IRRITATING. AVOID BREATHING VAPORS. KEEP CONTAINER CLOSED.
USE ONLY WITH GOOD VENTILATION. DO NOT CUT OR WELD CONTAINER.

HCC:B2
Boiling Pt:B.P. Text:644
Vapor Pres:<0.01 MM
Vapor Density:8.6
Spec Gravity:0.99
Evaporation Rate & Reference:0.01
Solubility in Water:100%
Appearance and Odor:BLACK GEL WITH AMINE ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN AND CURING AGENT
IN BATCHES GREATER THAN 1 LB.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.